Consensus

Clinical Performance of Screw- versus Cement-Retained Implant-Supported Fixed Reconstructions

General Comments

The restorative connection to the implant or abutment can be either screw- or cement-retained. With screw retained restorations, an abutment or a mesostructure may be separate from the restoration (two piece) or combined as part of the fabrication procedure (one piece).

In general, both retention types (screw- and cement- retained) have their advantages and limitations. The consensus statements of the third review focus on biologic and technical failures and complication rates observed with screw- and cement-retained implant-supported fixed reconstructions.

Consensus Statements

  • High survival rates can be achieved with both cemented and screw-retained fixed implant-supported prostheses. Neither failure nor complication can be avoided by selecting a prosthesis retention type.
  • Cemented all-ceramic prostheses have a higher failure rate than cemented metal-ceramic prostheses. However, no difference was found with screw retained prostheses.
  • Based upon the literature reviewed, the type of cement used does not influence the failure rate of cemented prostheses.
  • Technical complications occurred (estimated annual event rate of up to 10%) with both cemented and screw-retained prostheses. In the pooled data, the cemented prostheses exhibited a higher rate of technical complication.
  • Screw-retained prostheses exhibited a higher rate of ceramic chipping than cemented prostheses.
  • Biological complications can be found (estimated annual event rate of up to 7%) with both cemented and screw-retained prostheses. Cemented prostheses exhibit a higher rate of fistula formation and suppuration.

Treatment Guidelines

Based on the data in this review, a universal recommendation cannot be made for either cementation or screw retention. However, in a clinical situation that offers a choice of prosthesis retention type, the following recommendations may be made:

Cement retention may be recommended:

  • For short-span prostheses with margins at or above tissue level to simplify fabrication procedures
  • To enhance esthetics when the screw access passes transocclusally or in cases of malposition of the implant
  • When an intact occlusal surface is desirable
  • To reduce initial treatment costs
  • It is further recommended that the clinician understand that the procedures involved with cement retention for implant-supported crowns are not simple and should be carried out with great caution.

Downloads and References

  • 5th ITI Consensus Conference
  • Consensus Statement
  • English
  • Languages
  • Treatment Outcomes & Continuing Care

ITI QR code Mvc

Share this page

Download the QR code with a link to this page and use it in your presentations or share it on social media.

Download QR code
QR code